Spring applied brake - Servo Slim Line
SL 50010A00-0001
The Servo Slim Line spring-applied brake was designed primarily for applications with hollow shafts and small installation spaces. The "slim" single-disc brakes are flatter and lighter than the market standard in relation to their power density. Their large inner diameter makes them perfect for hollow shaft drives where the cables are routed inside through the joint or for applications where only minimal installation space is available, such as in automated guided vehicles (AGVs) or in medical technology.
Features
- Rated air gap tolerance is reduced to a few hundredths of a millimeter, providing enhanced power density
- Toothed hub-friction disc connection with minimal backlash
- Standard version suitable for flange mounting and face mounting
- Guaranteed minimum torque over life time - Flexible cable routing
- Fast opening and closing times
- Low inertia and weight
Technical details
| Description | Value |
|---|---|
| Brake Size | 10 |
| Torque | 5 Nm |
| Torque definition | M4 (static) |
| Operation mode | Holding Brake |
| Nominal voltage | 24 V |
| Nominal power | 20 W |
| Max. switching Energy per ES | 300 J |
| Number of Emergency stops | 200 |
| Total work | 60 kJ |
| Temperature range | -10...100°C |
| Max. rotation speed | 6000 min-1 |
| E-Stop rotation speed | 3000 min-1 |
| Backlash | < 1° |
| Thermal class | F |
| IP Protection class | IP00 |
| Weight | - kg |
| Brake type | SL 500 |
| Armature type | - |
| Hub type | Large |
| Hand release | - |
| Counter friction part | Flange |
| PWM control | possible |
| Outer diamter | 105 mm |
| Inner diamter | 58 mm |
| Lenght | 21 mm |
| Hub diameter | 55 mm |
| Keyway | - |
| Pitch circle front side | 97 mm |
| Pitch circle flange side | 97 mm |
