Brakes for Cobots

During periods of holding, the brakes of the cobot engage. Accordingly, power is saved. At the same time this provides a safe environment for the collaborative worker.

Kendrion Servo Slim Line spring-applied brake is used in automated guided vehicles and robotics — The Servo Slim Line is extremely flat and has a large inner diameter for routing the cabling through the shaft.

Electromagnetically actuated brakes are designed to bring a moving load to a standstill and hold it or to fix the position of an inactive load. The closing or opening of the brake usually must happen in a split of a second to be able to brake loads quickly and safely in high-frequency applications.

The Servo Slim Line spring-applied brake was designed primarily for applications with hollow shafts and small installation spaces. The "slim" single-disc brakes are flatter and lighter than the market standard in relation to their power density. Their large inner diameter makes them perfect for hollow shaft drives where the cables are routed inside through the joint or for applications where only minimal installation space is available.

MORE ABOUT THE SERVO SLIM LINE

Guaranteed torque and service life
Variable shaft-hub connection
Front & flange mounting possible
Flexible cable routing
Fast opening and closing times
Low inertia and weight

Brochures and Flyers

Brochure | Servo Slim Line | Slim brake

pdf - 2 MB

Download

brake expert mail

Kendrion Servo Line spring-applied brakes for integrated installation in servo motors

Torque range 0.27 Nm to 70 Nm
Sizes from 32 mm to 164 mm available
High power density due to patented air gap adjustment
Standard temperature range from -15°C to +120°C

Kendrion PM Line permanent magnet brake for use in industrial robots and wind power

Torque range 0.01 Nm to 240 Nm
Sizes 14 mm to 200 mm available
Residual torque-free opening
Temperature range from -5°C to +120°C

Kendrion HT Line permanent magnet brake for use in industrial robots and automation

Torque range 0.1 Nm to 280 Nm
Sizes from 19.3 mm to 205 mm available
Highest power density in small installation space
Extended temperature range down to -40°C possible

Torque range from 0.27 Nm to 8 Nm
Sizes from 32 mm to 127 mm available
Slim and space saving design
Suitable for hollow shaft motors
Temperature range from -10°C to +100°C

In the event of a power failure the brakes engage. The robot remains in position, and the gripper remains closed, so that there is no damage to the workpiece. Production can continue seamlessly from the point where it was stopped.

To ensure safety of man and machine, the robots engage their brakes and stop in position in emergency situations. This allows the process to continue smoothly.

Why is Kendrion the perfect partner?

The customer is the central focus of all our activities. The complete Kendrion team is committed to meet the requirements and wishes of our global customers. We place great value on partnership and open communication.